Category Archives: Projects

Mains Power for Skywatcher Motor Focuser

Posted on February 8, 2012 by james

Now I have the motor focuser on the 127 Mak I decided it might be useful to be able to power it from the mains when the opportunity arose. I had a rummage around for a suitable power connector socket, … Continue reading →

Posted in Astro Equipment, Astronomy, Projects | Tagged | 3 Comments

EQ3-2 Mount Tune-Up (Part Three)

Posted on February 6, 2012 by james

My EQ3-2 mount came with a pair of motors installed for the RA and DEC axes. I’ve had no major issue with the RA motor, but backlash in the DEC axis was very bad. Up to now my experience of … Continue reading →

Posted in Astro Equipment, Astronomy, Projects | Tagged | Leave a comment

Skywatcher 127 Mak Focuser Motor Drive Conversion

Posted on February 5, 2012 by james

It seems to be fairly widely accepted that the 127 Mak suffers badly from vibration when the focuser is adjusted by hand on the mounts it’s shipped with as standard. That’s certainly the case with mine. For me, it would … Continue reading →

Posted in Astro Equipment, Astronomy, Projects | Tagged , | 2 Comments

Solar PV Generation Update, Feb 2012

Posted on February 3, 2012 by james

It’s the start of another month and time to review our solar PV installation once more… Generation for January was 120kWh, almost double the estimated production for this area during January. In fact, every month so far we’ve exceeded not … Continue reading →

Posted in Environment, Projects | Tagged , , | Leave a comment

The New Home Apiary

Posted on January 10, 2012 by james

Plans the for current apiary space mean that this year my hives must move. Next to the hives I took over this year (on a bit of land belonging to a neighbouring farmer) we have a scabby patch of ground … Continue reading →

Posted in Bee-keeping, Projects, Smallholding | Leave a comment

Home-built Honey-warming Cabinet

Posted on January 10, 2012 by james

I have about 90kg of oilseed rape honey that has solidified and obviously before I can turn it into soft-set honey I need to melt it again. Warming cabinets are far from cheap to buy and it’s not exactly hard … Continue reading →

Posted in Bee-keeping, Projects, Smallholding | Leave a comment

A home-made Ashforth-style feeder

Posted on January 10, 2012 by james

I need around twenty feeders for my beehives this year. I’ve messed about with trays full of syrup on top of the crown board up until now, but I really need something a bit better. A few people recommended the … Continue reading →

Posted in Bee-keeping, Projects, Smallholding | Leave a comment

A home-made steam wax extractor

Posted on January 10, 2012 by james

In those years where we have a proper summer (not since about 2006 now), I put “waste” beeswax and old combs into my solar extractor to melt down the wax. In 2011 we didn’t really get that much decent wax-melting … Continue reading →

Posted in Bee-keeping, Projects, Smallholding | 1 Comment

Clearer Boards

Posted on September 14, 2011 by james

Back in the Spring when I wanted to take the OSR honey off some hives I had a real problem getting the bees to vacate the supers. Up until now I’ve always used a crown board fitted with Porter bee … Continue reading →

Posted in Bee-keeping, Projects | Tagged , , | Leave a comment

Pier Tube Deliberations

Posted on September 13, 2011 by james

Before construction on the main structure of the observatory can start, I need to get the pier in place because this will be set into a concrete block in the ground under the floor. As I’ve said before, my aim … Continue reading →

Posted in Astronomy, Observatory, Projects | Tagged , | Leave a comment