Monthly Archives: March 2024

Memory Lane, 21st September 2022: Who isn’t a fan of prisms?

Posted on March 14, 2024 by james

My wife had been muttering for a while about the fans we have in our bedrooms not being sufficiently high to be effective. And to be fair she was right. She’d balanced them on some cardboard boxes, but they weren’t … Continue reading →

Posted in Projects | Tagged | Leave a comment

Really? Before the middle of March?

Posted on March 14, 2024 by james

I finished potting strawberry plants today, from tubs that had sat outside all Winter. I know what variety they are, but they’re of mixed ages. So they’re all going to go into the greenhouse to see if I can get … Continue reading →

Posted in Smallholding, Veg plot | Tagged | Leave a comment

Table saw alignment gauge complete!

Posted on March 14, 2024 by james

At last, after a lot of changes of design for the 3d-printed mount, I have the entire thing assembled. The glue is taking a while to go off, so I’ll leave it overnight before testing it out.

Posted in 3D Printing, Projects, Workshop | Tagged | Leave a comment

Memory Lane, 10th September 2022: It’s the final harvest…

Posted on March 13, 2024 by james

Well, perhaps for the tomatoes. We’ll see. Depends a lot on the Autumn weather. If it’s kind there may be more. But for today, I have picked all of the remaining tomatoes that appeared ripe. And I decided it was … Continue reading →

Posted in Smallholding, Veg plot | Tagged , | Leave a comment

No dig diary, 13th March 2024

Posted on March 13, 2024 by james

Not much time to get stuff done today, but I did manage to weed Frankenstein’s Greenhouse for the second time this year. Sadly I think all the plants it contains intentionally are also going to have to be removed too. … Continue reading →

Posted in Smallholding, Veg plot | Tagged , | Leave a comment

Ok, ok, so I said I wasn’t going to do it

Posted on March 13, 2024 by james

But yesterday when looking for suitable bolts etc. to finish off the dial gauge project I found some 6mm plastic threaded knobs that I could use instead of nuts for locking the mount onto the carrier. Unfortunately to use them … Continue reading →

Posted in 3D Printing, Projects, Workshop | Tagged | Leave a comment

Memory Lane, 2nd September 2022: What’s this ear?

Posted on March 12, 2024 by james

Sweetcorn, of course! It’s harvest time! I used to have real problems growing sweetcorn, but since last year have started planting them in a block across two of my beds, three across the 1.2m ( 4′) bed. So I have … Continue reading →

Posted in Smallholding, Veg plot | Tagged | Leave a comment

Hifi wifi

Posted on March 12, 2024 by james

Last week my wife and daughter started complaining that they were seeing quite poor performance from our Internet connection, but I couldn’t see anything wrong with it and from the desktop PC in my office I was not having a … Continue reading →

Posted in Computing | Tagged , | Leave a comment

My workshop vacuum still sucks :(

Posted on March 12, 2024 by james

Having replaced the power switch on my workshop vacuum it appears that there are other problems too. When run in “normal” mode it seems fine (other than the volume, which I’ll come to in a moment), but if I plug … Continue reading →

Posted in Workshop | Tagged | Leave a comment

No dig diary, 12th March 2024

Posted on March 12, 2024 by james

After an awful lot of rain again last night there was little chance to do anything much in the garden, so I have settled for putting my seed potatoes out to chit. I’m only growing the variety “Charlotte” this year. … Continue reading →

Posted in Smallholding, Veg plot | Tagged , | Leave a comment