-
Recent Posts
Recent Comments
- Mauricio on EQ3-2 Mount Tune-Up (Part Two)
- Alexander Beening on Missing icons in Kstars and Ekos
- Bharat Adur on About
- JEAN-PIERRE LIGUORI on Missing icons in Kstars and Ekos
- aew on OWFS on a Raspberry Pi
Archives
- April 2024
- March 2024
- February 2024
- March 2022
- February 2022
- January 2022
- December 2021
- November 2021
- September 2021
- August 2021
- July 2021
- June 2021
- May 2021
- April 2021
- March 2021
- January 2021
- December 2020
- November 2020
- October 2020
- June 2020
- February 2020
- January 2020
- November 2019
- September 2019
- August 2019
- July 2019
- June 2019
- May 2019
- April 2019
- March 2019
- February 2019
- January 2019
- December 2018
- November 2018
- October 2018
- September 2018
- August 2018
- June 2018
- May 2018
- April 2018
- March 2018
- February 2018
- January 2018
- November 2017
- October 2017
- September 2017
- August 2017
- July 2017
- June 2017
- May 2017
- April 2017
- March 2017
- February 2017
- January 2017
- November 2014
- October 2014
- September 2014
- August 2014
- February 2014
- November 2013
- October 2013
- June 2013
- May 2013
- April 2013
- March 2013
- February 2013
- December 2012
- November 2012
- October 2012
- September 2012
- August 2012
- July 2012
- June 2012
- May 2012
- April 2012
- March 2012
- February 2012
- January 2012
- October 2011
- September 2011
- March 2011
- February 2011
Categories
- 3D Printing
- Astro Equipment
- Astroimaging
- Astronomy
- BBC Micro
- Bee-keeping
- Beer-making
- Books
- Chickens
- Cider-making
- Computing
- Cutting Garden
- Dashcam
- Environment
- Learning piano
- Linux
- Machinery
- MythTV
- Observatory
- Orchard
- Pigs
- Polytunnel
- Projects
- Quadcopters
- Random
- Raspberry Pi
- Science
- Smallholding
- Smoker
- Swimming
- Television
- Uncategorized
- Veg plot
- Workshop
Meta
Tag Archives: beehive
Beehive repair thoughts
I have some old boxes that were either made the wrong size (depth) or have shrunk over the many years they’ve been out in the open. Some of them I’ve extended back to the intended size with pieces of timber … Continue reading
A bit of progress with hive repairs
“Other stuff” seems to have taken up much time today, but I did at least get a little bit of progress made on repairing hives. First I put some danish oil on the rims I added to floors a few … Continue reading
Memory Lane, 15th November 2022: A new beekeeping tool
Given all the under-floor entrances I have made, there is now a possible need for a tool to clear the entrance slot of rubbish in case it gets blocked up, so today I had a swift visit to the workshop … Continue reading
A few beehive repairs
Last Spring I ended up doing far more beehive repairs than I ever thought I would need to, so there’s actually very little to fix for this season. The most important item is to add a rim to a couple … Continue reading
More ply for beehive parts
I needed some more thin ply, so I messaged a local business that I’ve collected some from previously. They told me they’d be cutting up to 50 (2.4m x 1.2m or 8’x4′) sheets this week and I was welcome to … Continue reading
Memory Lane, August 2nd 2022: Double-walled hives
Whilst sorting through some old kit I was given years back, checking out what was effectively beyond use and what just needed some TLC, I came across this unusual (to me) national hive with single-walled front and back, and double-walled … Continue reading
Memory Lane, 17th July 2022: I can see you!
My next little tablesaw/woodworking project: clear, insulated crownboards for beehives. More box joints for these, to make up a box about 60mm deep. Then a sheet of clear polycarbonate on the bottom, held in place around the sides by a … Continue reading
Memory Lane, 3rd July 2022: Floors in manufacture
Next job for the new table saw… My bees tend to fill mesh floors with propolis, suggesting to me that they’re not very keen on them, so I’ve decided to move back to solid or sealed floors, and to kick … Continue reading
Clearer Boards
Back in the Spring when I wanted to take the OSR honey off some hives I had a real problem getting the bees to vacate the supers. Up until now I’ve always used a crown board fitted with Porter bee … Continue reading